Seite 2 von 2
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Mittwoch 18. Januar 2017, 18:24
von Waterman
Waterman hat geschrieben:Faltenbälge sind weiterhin von Granit Parts verfügbar zum Preis von rund 80€/Stk. Ich habe im November dort eine Manschette gekauft, wenn ich zuhause bin suche nochmal die genaue Bestellnr. und den derzeitgen Preis raus.
Granit Parts vertreibt die Manschette für unsere Hurth Vorderachse unter der Teilenr. 70806004, erhältlich über die lokalen Händler/Vertriebspartner. Der Preis betrug 78,43 € inkl. MwSt.
Weitere Infos finden sich auf der Homepage von Granit Parts:
https://www.granit-parts.com/product/Ge ... V/70806004Alternativ kann natürlich auch eine günstigere Universalmanschette verwendet werden.
Viele Grüße
Waterman
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Donnerstag 19. Januar 2017, 12:41
von cableguy
This is great news!
Thank you all for your help.
Josef, I look forward to when they arrive
Now I can stop worrying about my Iceland trip
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Freitag 20. Januar 2017, 11:06
von deepurple
Hello .
I'm reading this post about.
My german language is out .
I understand you could find this CV Joint .
What 's the process to buy ? Seller, adress ...?
Regards .
Bruno.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Freitag 20. Januar 2017, 13:29
von oz_explorer
Hi Bruno,
you've got a PN with the process.
Cheers Simon
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Dienstag 24. Januar 2017, 21:06
von oz_explorer
so ein Gleichlaufgelenk ist noch übrig. Wer Interesse daran hat bei mir melden - first come first serve.
Gruß Simon
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Dienstag 24. Januar 2017, 21:56
von cableguy
oz_explorer hat geschrieben:so ein Gleichlaufgelenk ist noch übrig. Wer Interesse daran hat bei mir melden - first come first serve.
Gruß Simon
Hi Simon,
Could I have this please?
Regards
Ray
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Freitag 27. Januar 2017, 19:00
von oz_explorer
Alle Gelenkwellen sind verkauft. Heute habe ich die Lieferung erhalten und die Teile gehen, wenn die Bezahlung eingegangen ist, nächste Woche in die Post.
Grüße Simon
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Freitag 27. Januar 2017, 21:02
von Ulrich Pfitzner
Hallo Simon
leider ist mein englisch jetzt nicht so gut. Hast du jetzt einen Lieferanten aufgetan oder wie ist das.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Samstag 28. Januar 2017, 10:39
von oz_explorer
Morgen Ulrich,
Ich habe über die vorher genannte HP eine Anfrage gestartet, ob sie die Gleichlaufgelenke vom LT nachbauen können. Dabei stellte sich heraus, dass diese im Auftrag für GKN die Gleichlaufgelenke produziert haben. Die hatten noch ein paar auf Lage, die jetzt unters Volk gebracht wurden. Nachbau der Gleichlaufgelenke über die Firma sollte somit kein Problem - wie immer wohl nur eine Frage des Geldes.
Grüße Simon
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Samstag 28. Januar 2017, 10:57
von Ulrich Pfitzner
Hallo Simon
schick mir mal die Daten per PN mit wem du dort gesprochen hast. Ich werde mal anfragen was eine nachproducktion kosten würde.
Dann werde ich mich um dieses kümmern wenn bedarf ist.
Ich würde dann auch hier die anfrage starten wer was braucht.
Danke
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Montag 30. Januar 2017, 16:50
von oz_explorer
Hallo zusammen,
da hat sich noch was aufgetan. Es sind noch ein paar Gleichlaufgelenke verfügbar. Wer noch welche will bitte PN an mich.
Gruß
Simon
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Montag 6. Februar 2017, 15:18
von cableguy
Just wanted to say a big thanks to Josef and Simon for their help in finding, purchasing and posting the Cv joints.
I now need to get the wheel bearings ordered and soon will get round to fitting them so that we can carry on our adventures.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Montag 15. Mai 2017, 13:39
von cableguy
Hi all, I've finally fitted the CV joints and new boots. I took the trouble to take lots of photos and wrote a detailed post on my blog at
http://www.microexpeditions.co.ukunder the heading 'Frankenwagen Reboot'
I thought it might be useful to some of you guys.
Kind regards
Ray
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Dienstag 16. Mai 2017, 16:12
von Waldfahrer
Hi Ray,
thank you for your documentation, very interesting photos
Glad to hear, that the Joint Change was successful!
Did you measure/read the type of the taper bearings of the steering housing?
How did you fit the new wheel bearings?
Normally one would need the VW-special tool 3175 for estimating the thickness of the compensation washer.
kind regards Josef
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Mittwoch 17. Mai 2017, 12:59
von cableguy
Hi Josef, good to hear from you. I couldn't see any numbers on the bearings, but I did measure them for you. I have them written down at home.
I did notice in the manual that you should use that tool you mention, but we didn't have one.
We installed the new bearing and the 2 spacers fitted, tightened the lock nut(not to the full 600NM) and checked for play.
We installed the road wheel to help check this. There was too much play, so we took the thinner of the 2 out and tried it again.
We had to swap them around again until we were satisfied. Not a very scientific way of doing it, but I'm confident that it will be fine.
There was no play in it at all once we had finished.
Ps I've edited the blog to mention the tool and our work around.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Montag 11. März 2019, 17:40
von kuzik
Hallo,
ich suche das Ersatzteil Gleigelenk/Front Axle CV joint zum 4x4 VW. Es scheint, als ob dies leider nicht mehr hergestellt wird.
Hat jemand eine Idee, wo man es kriegen kann?
Danke schon mal im Voraus.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Montag 11. März 2019, 23:42
von Waterman
Moin,
ja, zu mindestens eins bei mir. Stammt aus der Sammelbestellung, aber ich kann es jetzt unbenutzt abgeben.
Bei Interesse gerne näheres per PN.
Viele Grüße
Waterman
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Samstag 6. April 2019, 09:49
von kuzik
Waterman hat geschrieben:Moin,
ja, zu mindestens eins bei mir. Stammt aus der Sammelbestellung, aber ich kann es jetzt unbenutzt abgeben.
Bei Interesse gerne näheres per PN.
Viele Grüße
Waterman
Hallo,
PN habe ich Ihnen schon geschickt
Liebe Grüße,
Julia
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Samstag 11. Mai 2019, 19:19
von kuzik
Waterman hat geschrieben:ja, zu mindestens eins bei mir.
Waterman
Hallo,
da keine Antwort auf PN kam, wollte ich mal fragen, ob das Teil noch zu haben ist
Danke schon ein mal im Voraus!
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Samstag 7. September 2019, 14:05
von deepurple
Hallo.
May be to find to remade CV JOINTS.
I know that CV joints from C35 Citroen or Fiat 142 are the same .
Cup is the same .
Balls are the sames
Nut is the same .
But shaft is different and short .
I had found a company . They remade gear boxes ,transfer boxes for race's cars and industry .
I ask , yes we can , we do it for race's cars .
I 'd bought CV C35 ;
Two months later , i had a CV LT 40 .
Some pictures to explain.
I drive on 2000kms this summer .
Bruno.
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Sonntag 23. August 2020, 12:18
von LTAnfänger
- 1289E067-1A6B-4DD7-B477-2D25BC6DA796.jpeg (246.35 KiB) 23322-mal betrachtet
Servus zusammen,
Ich bin ein neuer Stolzer Besitzer eines Neuen\Alten ex Feuerwehr 4x4 aus dem schönen Österreich.
Entsprechend wie nicht anders zu erwarten braucht der kleine erstmal schön viel Liebe, Schweißdraht und Farbe.
Beim ersten überprüfen der Achsen ist leider der erste Graus zum Vorschein gekommen.... Gleichlaufgelenk Beifahrerseite Verzahnung zur Antriebswelle abgedreht.
Daher meine Frage, hat jemand ne Möglichkeit des gutes Stück zum reparieren oder liegt leicht angestaubt bei jemanden noch so ein gutes Stück rum?
LG Tobi
Re: Gleigelenk/ Front axle CV joint 291407311B
Verfasst:
Sonntag 23. August 2020, 19:01
von Core
Hallo Tobi,
Herzlichen Glückwunsch zur 4x4 Feuerwehr.
defekte Gleichlaufgelenke, die durch längeres fahren mit defekten Achsmanschetten, unfachmännische Reparaturen oder auch werkseitige Montagefehler habe ich in den letzten Jahren schon oft gesehen.
Eine Reparatur ist leider nur selten möglich.
Ich habe aber noch mehrere gebrauchte und neue Gelenke liegen.
Bekommst eine PN.
Viele Grüße
Manfred aus Hamburg